Additional equipment

Additional equipment

 

Block out box for walls - TSS and RVK units

scatola per pannelli

Standard sizes to fit the corresponding TSS and RVK units. Made of elastomer materials, easy to prepare for casting. Brushing a retarder on the surface is handy for releasing it afterwards.

The rubber box is made of casted polyurethane elastomer (PUR Elastomer) and have a hardness 60 shore.

Technical data:

  • Densitet:                             1100 kg/m3
  • Tensile strength:               2,5 MPa
  • Tensile strain at rupture: 200%

 

flangia di gomma per pianerottoli

Rubber flange for landings - TSS and RVK units

The rubber flange is made of casted polyurethane elastomer (PUR Elastomer) and have a hardness 60 shore.

Technical data:

  • Densitet:                             1100 kg/m3
  • Tensile strength:               2,5 MPa
  • Tensile strain at rupture: 200%

 

 

Guiding piece / lid for RVK / TSS 40 and 100

The guiding pieces are made of ployethylene PE. And are suited for both as a guiding piece in the formwork and as a lid when the precasted element are stored outside.

pezzo guida

 

Winter storage.

This product is used to prevent water and snow entering the RVK/TSS device when the landing is stored outside, especially in winter.

The productis made ​​of EPDM POS 300/60, this fabric is water repellent

   winter storage

DESCRIPTION

ARTICLE NO.

Vertical rubber flange 41

GF 40

Vertical rubber flange 101

GF 100

Vertical rubber flange 102

GF 102

Block out box for walls, with magnet 41

USK 40 M

Block out box for walls, with magnet 101

USK 100 M

Guiding piece /lid for RVK/TSS 41

Lokk 40

Guiding piece /lid for RVK/TSS 101

Lokk 100

Winter storage 41

Seal 40

Winter storage 101

Seal 101


 

 

© Copyright 2016 | 2017 - Eiseko Computers Srl