IDEA StatiCa Steel

IDEA StatiCa Steel

Complete design of steel structural members and details. Beams, columns, frames. EN 1993-1-1 plus National Annexes, SIA 263. Comprehensive ULS/ SLS code checks including deflections. Flexural and lateral-torsional buckling. Interaction of all internal forces N/ Vy/ Vz/ Mx/ My/ Mz. Unique FE calculation of cross-section properties and stress distribution.

Sofrware strutturale per l'acciaio

download brochure


IDEA StatiCa Steel is used by engineers dealing with members/details of steel structures. Designing is based on internal forces model created either in IDEA StatiCa or imported from FEA programs like Midas, Axis VM, SCIA Engineer and others.

Esempi edifici con IDEA StatiCa Steel

 

  • Complete design of structural members and details
  • Beams, columns, frames
  • General cross-section/wide range of rolled and welded sections
  • Straight/ curved, prismatic/ tapered
  • EN 1993-1-1 plus National Annexes, SIA 263
  • Strength and stability steel member design/ check
  • Comprehensive ULS/ SLS code checks including deflections
  • Flexural and lateral-torsional buckling
  • Interaction of all internal forces N/ Vy/ Vz/ Mx/ My/ Mz
  • Optimization of cross-sections
  • Advanced FE calculation of cross-section properties and stress distribution
  • Unique analysis of shear stress from shear forces and torsion
  • BIM compliant – interface to various 3D FEA software

 

  • Progetto completo di elementi strutturali e dettagli.
  • Travi, pilastri, telai
  • Geometrie delle sezioni generiche /ampia gamma di sezioni laminate e saldate
  • Lineari/ curve, prismatiche/ rastremate
  • EN 1993-1-1 più Annessi Nazionali, SIA 263
  • Progetto / verifica resistenza e stabilità degli elementi in acciaio
  • Verifica esauriente agli SLU/SLE includi spostamenti
  • Stabilità flessionale e flesso-torsionale
  • Interazione di tutte le forze interne N/ Vy/ Vz/ Mx/ My/ Mz
  • Ottimizzazione della sezione
  • Calcolo avanzato FE delle proprietà delle sezioni e diaframma delle tensioni
  • Analisi unica del taglio fagli sforzi di taglio e dalla torsione
  • Conforme BIM– si interfaccia a diversi software 3D FEA

IDEA Connections

Key value of IDEA StatiCa Steel is our new module Connection – a result of our long-term R&D efforts in the area of structural design and check of joints, connections and details of steel structures.

  D frames & trusses               Footings, anchoring           3D frames & trusses

Telai 2D & travature reticolari 	Fondazioni, ancoraggi 	Telai 3D & travature reticolari

  • Structural design and check of joints, connections and details of steel structures
  • Joints with various numbers of beams in multiple directions and loads
  • Analysis model created according to manufacturing operations used – cuts, plates, stiffeners, ribs, openings
  • Calculation of internal stress/forces in joints based on elastic/plastic FEA analysis
  • Automatic creation of joint’s FEA model
  • Efficient FEA solver delivers result faster than current methods
  • National-code-independent solution; design checks according to EN 1993-1-1
  •  Checks of bolts and welds using standard component method
  • Graphical presentation of shape of the joint to check member collisions
  • Clear information about behaviour of the joint/connection
  • Both simple (1 connection = 1 A4) and detailed result reports
  • Wide range of predefined joint/connection templates; user defined templates

 

CSS – cross-sectional analysis

Analisi sezione acciaio

  • Massive, thin-walled or mixed cross-section of any shape
  • Import of the shape from DXF
  • More cross-section components, each of different material
  • Number of openings in cross-section is not limited
  • Relative references between components, easy corrections and design
  • FE analysis of cross-sectional properties and stress distribution
  • Unique calculation of stress caused by shear and torsion
  • Graphical presentation of shear flow
  • Input of design matrices representing extreme sets of internal forces
  • More cross-sections can be checked for different design matrixes
  • Analysis of normal, shear and HMH stress
  • Envelopes of shear stress for the whole design matrix

 

Steel beam

Trave in acciaio

  • Single span or continuous beam, cantilevers
  • Straight or curved in plane
  • Elevation in vertical plane
  • Standard or general cross-sections
  • Tapered beams in any span
  • Point, moment and line loads
  • Complete ULS and SLS combinations according to EN 1990
  • 1xA4 or more detailed output report
  • Design according to EN 1993-1-1, SIA 263
  • Proper description of LTB conditions
  • Complete ULS and SLS checks
  • Optimal dimensions of cross-section
  • Bill of material
  • 1xA4 or more detailed output report

Steel column

Pilastro in acciaio

  • Column with one or two corbels
  • Free, fixed or flexible supports
  • Standard or general cross-sections of any shape
  • Forces and moments at the end or on corbels
  • Complete ULS a SLS combinations according to EN 1990
  • Design according to EN 1993-1-1, SIA 263
  • Proper description of flexural buckling and LTB conditions
  • Calculation of buckling coefficients
  • Complete ULS and SLS checks
  • Optimal dimensions of cross-section
  • Bill of material
  • 1xA4 or more detailed output report

 

 

 

VIDEO IDEA Steel - IDEA Connections

Brief introduction about Idea Steel.
Design of steel members of the structure calculated by Idea Statica, AxisVM, EPW

video introduttivo software IDEA Steel

Workshop for new users of IDEA Connection. Technical aspects of calculation, examples, design of elements.

istruzioni software di calcolo nodi in acciaio

Guarda tutti i video sul nostro canale YouTube!

 

© Copyright 2016 | 2017 - Eiseko Computers Srl