IDEA Bracket / Corbel program is used for structural design of concrete structure details. It is based on Strut & Tie method and provides a comprehensive checks according to Eurocode. You define dimensions of bracket/ corbel and appropriate load effects. The number of load cases (extreme effect) is not limited.
FEATURES OF THE MODULE
- Ampia gamma di mensole/supporti rettangolari/svasate
- Diversi modelli di armatura predefiniti
- Posizioni automatiche/manuali dell'armatura
- Esportazione in DXF
- EN 1992-1-1 più Annessi Nazionali, SIA 262
- Verifiche esaurienti con il metodo Tirante-Puntone
- Comprehensive design of reinforced concrete corbels and brackets
- Rectangular/ sloped shape of corbels/ brackets aligned symmetrically or to column edges
- Prismatic column or reduced depth of column above the corbel
- Variety of predefined reinforcement templates, automatic/ manual position
- Primary reinforcement: plane looped/ space looped/ framing bars
- Secondary reinforcement: vertical and/or horizontal stirrups
- DXF export of real reinforcement cage
- EN 1992-1-1 plus National Annexes, SIA 262
- Comprehensive ULS code checks using Strut & Tie method
- Strength of struts, ties, nodal zones
- Detailing – vertical and horizontal stirrups, anchorage lengths, mandrel diameters
- Quick check and/or detailed analysis if necessary
- Eurocode supportive – references to EN provisions, tooltips, explanations, warnings, error messages
- Brief output overview or detailed protocol
Bracket / Corbel is used for structural design of concrete structure details. It is based on Strut & Tie method and provides a comprehensive checks according to Eurocode. It is sold as standalone program or as part of a more complete application "IDEA StatiCa Concrete"
Complete design and drawing of all the reinforcement.
You define dimensions of bracket/ corbel and appropriate load effects. The number of load cases (extreme effect) is not limited.
The program has a modern and easy-to-use interface.
Generic Loads: Another advantage of the application are the generic loads. The user can edit the size and position of the bearing surfaces, the eccentricity of force effects and can define any number of load cases.
Firstly, primary reinforcement is applied – plane or space looped bars, framing bars. After that, secondary reinforcement is added – vertical or horizontal stirrups. Overall drawings are generated.
The bracket is reinforced with standard reinforcing elements. Clearly describe the resulting figures detail reinforcement.
There is also a 3D view of a reinforced Tops and detailed Drawing of individual items including anchor lengths.
You have everything you need to drawings.
3D view helps you to properly understand all the details. Automatic bill of material and counting/marking of elements.
Proper implementation of Strut & Tie method is based on Eurocode methodology. It was discussed and verified with various experts with practical experience.
Detailing check and brief or detailed report are also available .
User can see exactly how the model is created an how it works.
Please fill in the following form, our staff will answer as soon as possible to the email address you entered. Please specify which software you are referring to.
Please fill in the form below and we will send you an email with the link to download the FREE version of the software and all the instructions to the email address you entered.